Follow Us
The Ultimate in Sensor Technology is here!

PHCC Pro Series, the company that
revolutionized the float switch has done it again, with the introduction of the new Ultimate Sensor Switch and the USC3 Ultimate Controller System.

How This System Works:

Ultimate Sensor Switch and the USC3 Ultimate Controller System

Why This System Works:

*Triac technology used in the USC3 controller is commonly used in AC power control applications. It's proven, reliable and found in modern computerized control circuits of many household small and major appliances, such as microwave ovens.

Coupled with the embedded computer in the Ultimate Sensor, this forms a foolproof system for rising water recognition and pump activation.
Ultimate Sensor Switch and the USC3 Ultimate Controller System

PHCC Pro Series USC3 Ultimate Controller

    The USC3 Ultimate Controller monitors pump and power conditions and sounds an alarm when problems are detected. The Ultimate Controller includes the Ultimate Sensor.

PHCC Pro Series Ultimate Sensor Switch

    This new solid-state sensor has no moving parts to wear out or break. It's simply a monitoring sensor rod. When the water level touches the rod, the sensor detects it and activates the pump.
    Other features include:

  • Monitors and sounds an alarm and alerts when:
    • AC power has failed
    • 9v battery is low or slide switch is off
    • Pump or plumbing problem is detected caused by pump running continuously for 10 minutes
    • System is operating light (flashes)
  • Reliable, proven and patented Triac technology used in many industries
  • Adjustable run time from 5-45 seconds after the water level falls below the sensor
  • Includes export terminals for connecting to a remote dialer or home security system
  • Sensor can be unplugged for ease of installation
  • Activates pump weekly, extending pump life
  • Universal controller mounting
  • 4' power cord
    Other features include:

  • Imbedded computer monitors any material buildup on sensor rod and keeps on working.
  • Sensor ball can be raised or lowered to adjust activation level
  • Slow Fill Recognition senses the water level regardless of how fast or slow the sump pit is filling up
  • Designed for use in sump and sewage pits
  • Easy Installation - with a removable connector, the sensor wire can be easily fed through small sump pit cover holes, then reconnected directly to the controller
  • 3.5" long, 3-16 grade stainless steel sensor rod will not corrode
  • Mounts to discharge pipe with included stainless steel hose clamp

The new PHCC Ultimate Sensor Switch and USC3 Controller system are also available as replacement piggyback switch and controller for retrofitting other pumps that need the "ultimate" answer to traditional vertical or check ball float switches.

Included with the System:

  • Ultimate Sensor Switch
  • USC3 Ultimate Controller
  • Hose clamp
Click here to find a distributor near you  Download PDF
Click here for the Ultimate Sensor and USC3 installation manual  Download PDF
Click here for the Ultimate Sensor and USC3 installation Brochure  Download PDF
Click Here to download the Switches and Sensors Brochure  Download PDF