Follow Us
Linked In

PHCC Pro Series PS-C33
Combination Sump Pump System

Energy Efficient Remote Notification

PHCC Pro Series PS-C33 Combination Sump Pump System

Download Manual  Download PDF
Download Brochure  Download PDF

Other PHCC Combination Sump
Pump Systems Available:




  • Pre-Assembled for quick and easy installation
  • Energy efficient permanent split capacitor (PSC) motor
  • Continuous duty rated
  • Dual float switches on primary and backup pumps
  • Automatically switches to battery power when AC fails
  • Backup pump will assist primary pump if excessive amounts of water are entering the sump
  • Detects irregularities, sounds an alarm, and pinpoints problems and solutions on control panel
  • Maintains and recharges battery automatically
  • Alarm can be silenced during a power outage
  • Output terminals for connection to a security system or auto-dialer
  • Connect two B-2200 batteries in parallel for extended run time (PS-C33 only , parallel cables sold separately)
  • 4 Year warranty when purchased from and installed by a contractor, otherwise 3 year
  • Water cooled
  • Designed for use with maintenance or maintenance free batteries
Primary Pump
Flow @ 10 ft Head
3000 GPH
Motor HP/Type
Max Head
30’ (9.1M)
115V, 60Hz
4.0 Amps
Backup Pump
Flow @ 10 ft Head
2400 GPH
12 VDC
DC Current
16 Amps
10.0” (25.4 cm)
11.0” (27.9 cm)
23.7” (60.2 cm)
43 lbs (19.5 Kg)
Energy Savings
  • PS-C33 saves on average $55 per year
    (assumes industry average of 9.5 amps for ⅓ HP pumps and 10.5 amps for ½ HP pumps,
    $0.12 per kilowatt hour and running time of 5 minutes per hour)
Backup Pump Monitoring
Will sound alarm indicating:
  • Battery needs water
  • Battery is old and needs to be replaced
  • Battery is discharged or defective
  • Cable is loose or terminals are corroded
  • Power, fuse or circuit breaker has failed
  • Pump has been activated; check the main pump for failure
  • Backup pump defective or clogged
Added Features:
  • Automatically tests pump weekly
  • Backup pump runs off AC power as well as battery power
  • Displays percentage of power remaining in the battery
Pump Construction
S3 Sump Pump Cutaway Primary Pump
  • Permanent Split Capacitor (PSC) motor
  • Upper and lower sealed ball bearings
  • Cast iron / Stainless Steel housing
  • Dual carbon ceramic shaft seals
  • Polycarbonate impeller
  • Stainless steel fasteners
Backup Pump
  • Non-corrosive ABS housing
  • Stainless steel shaft
  • Carbon ceramic seal w/ Buna-N seal
  • Non-corrosive fiber filled impeller
Included with System
  • Primary pump
  • Backup pump
  • Backup system controller/charger with fluid sensor
  • Primary pump controller (DFC1) with caged dual float switch
  • 1-½” no-hub coupling
  • Assembly includes two (2) check valves and hardware
  • Sump Foot™ - raised platform for both pumps
  • Battery box