Follow Us
 

PHCC Pro Series 2400
Battery Backup Sump Pump System

 

PHCC Pro Series 2400 Battery Backup Sump Pump System

Download Manual  Download PDF
Download Brochure  Download PDF

Other PHCC Backup Sump Pumps Available:
PHCC - 1730
PHCC - 1000

 

Features

  • Automatically switches to battery power when AC fails
  • Recharges automatically
  • Monitors system conditions and alarms when:
    - Battery needs water, is discharged or
      needs to be replaced
    - Battery cable is loose or corroded
    - Power plug is disconnected, fuse is
      blown or circuit breaker is tripped
    - Pump is clogged or broken
    - Backup pump has been activated
  • Alarm can be silenced during a power outage
  • Displays percentage of power remaining in the battery
  • Runs pump weekly to test for proper operation
  • Can run directly on AC power
  • Output terminals for connection to a security system or auto-dialer - Let the system call you
  • Accommodates up to two (2) B-2200 batteries for 100 hours of pumping*
  • Designed for use with maintenance or maintenance free batteries
  •    * Based on 10% duty cycle. Run times
         may vary based on inflow of water.

Specifications
Pump
Flow/Amp. Draw @ 10 ft Head
2,400 GPH / 16.0 Amps DC
Max Head
17 ft (5.2 M)
Inlet
Snap-on Non-corrosive ABS Screen
Motor Type
Brush-type
Voltage
DC12 VDC
Charger/Monitor
Power Input
115 VAC, 60Hz
Output Voltage/Current
12 VDC 13.0 Amps
Pumping Time with B-2200 Battery
50 Hours*
Pumping Time with B12-90 Battery
50 Hours*
Pumping Time - Intermittent Duty
Days of pumping
Float Switch
Dual micro reed switch
with protective cage
Shipping Weight
22.0lb. (9.9Kg)
   * Based on 10% duty cycle. Run times
     may vary based on inflow of water.
Dimensions
Pump
Width
9.0" (22.86 cm)
Depth
4.5" (11.45 cm)
Height
8.5" (21.59 cm)
Construction
  1. Pump housing - non-corrosive ABS
  2. Impeller - non-corrosive fiber filled
  3. Stainless steel shaft
  4. Carbon ceramic seal plus additional Buna-N seal
  5. Dual ball bearings
Included with System
  1. Control unit with fluid sensor
  2. Pump
  3. Caged dual float switch
  4. Battery box
  5. Battery filler bottle - for easy battery maintenance
  6. Battery cap to accommodate fluid sensor