Follow Us
 

PHCC Pro Series 1000
Battery Backup Sump Pump System

 

PHCC Pro Series 1000 Battery Backup Sump Pump System

Download Manual  Download PDF

Other PHCC Backup Sump Pumps Available:
PHCC - 2400
PHCC - 1730

 

Features

    Dependable 1000 GPH, continuous-duty, submersible pump
  • Pumps 1000 GPH at a 10-foot lift
  • Stainless steel shaft, rulon seal, and rustproof housing provide long-lasting, reliable operation
  • Trickle charger maintains the battery at full charge
  • System continuously monitors the battery and power conditions to ensure dependable operation and sounds an alarm when:
       - The AC power is out or the
          circuit breaker has blown
       - The battery fluid is low
          and water needs to be added
       - The pump was activated
       - The battery is discharged,
          defective or the terminals
          need cleaning
  • Alarm can be silenced
Specifications
Pump
Flow/Amp. Draw @ 0 ft Head
2,000 GPH / 6.5 Amps DC
Flow/Amp. Draw @ 10 ft Head
1,000 GPH / 3.25 Amps DC
Max Head
15 ft (4.6 M)
Inlet
Snap-on Non-corrosive ABS Screen
Motor Type
Brush-type
Voltage
DC12 VDC
Charger/Monitor
Power Input
120 VAC, 60Hz
Output Voltage/Current
12 VDC .4 Amps
Pumping Time with B-1000 Battery
6 Continuous Hours
Pumping Time with B-2200 Battery
12 Continuous Hours
Pumping Time with B12-90 Battery
10 Continuous Hours
Pumping Time - Intermittent Duty
Days of pumping
Float Switch
Dual micro reed switch
Shipping Weight
9.0lb. (4.1Kg)
Dimensions
Pump
Width
8.5" (21.6 cm)
Depth
4.5" (11.45 cm)
Height
7.75" (19.7 cm)
Construction
  1. Pump housing - non-corrosive ABS
  2. Impeller - Non-corrosive ABS
  3. Stainless steel shaft
  4. Carbon ceramic w/rulon seal
  5. Dual ball bearings
Included with System
  1. Control unit with fluid sensor
  2. Pump
  3. Dual float switch
  4. Battery box
  5. Battery cap to accommodate fluid sensor